In April, my good friend Sammy's mom, Dana, came into Mrs. Yollis' class and conduced an art project. I know her very well! The art project was for each student to make a kite out of paper. Here are the directions, so you can make one at home.
* * * * * *
Step 1. Take a piece of paper and fold it in half. Then open the paper and make a one inch mark on each side of the paper, five inches in from the side. Put the two marks together and fold the paper back on itself on each side until the paper is flat. Tape the two sides together.
|Notice the sides are not rectangles. They are trapezoids. The part that sticks up (the part with the string attached to it) is another trapezoid. Photo by Royce.|
Step 3. Do not worry if your kite will not stay together. Attach a wooden stick across the bottom of your kite using tape. Try not to cover your designs (step 2).
Step 4. Collect a rainbow colored piece of fabric, and cut the inside of the end just a tiny bit. The end should be split into two pieces of fabric that are connected to one. Look in the picture above. Glue or tape one end of the cut fabric to one side of the stick-up middle part and the other end to the other side of it. You have your tail!
Step 5. For your final step, punch a hole into the end without the tail on the stick-up middle flap. Tie a LONG STRING to the hole. The longer the string, the higher the kite can fly. Tape the other end of your string to a toilet paper role. You can ravel or unravel your string on the toilet paper role without it falling off because it is taped.
* * * * * *
|Playing outside the classroom. I hope they all had fun with their kites!|
Photo by Mrs. Yollis